Last week, Josie Morgan joined the team for a work experience placement getting hands on experience in each of our departments. Find out what Josie got up to.
Last week, Josie Morgan joined the team for a work experience placement getting hands on experience in each of our departments. Find out what Josie got up to.
Find out what electronic design engineer intern, Charlie Freestone a robotics student from the University of Plymouth, got up to during his time at Cubik HQ.
We were invited by SETSquared, a university partnership in the South West region, to deliver a workshop aimed at demystifying the electronic product development process.
We are delighted to announce that for the third year in a row we have passed the International ISO 9001:2008 Quality Management audit, with no non-conformities.
Following a significant period of growth, Cubik Innovation has relocated to Verona House in Fishponds, Bristol providing the business with a greater production space.
Cubik Innovation celebrates it's fourth birthday (our first in our new home!) with a very colourful cake!
George Lear, a Year 10 student from Mangotsfield School, impressed the team with his electronics and Raspberry Pi knowledge during his work experience week. Find out what George got up to.
We are delighted to announce that we will be renewing our sponsorship of Cleve RFC following the impressive impact the club has had on the local community.
This week, we were joined by Will Couch from BTE Academy for his work experience week. Find out what Will got up to at Cubik HQ.
Target Darts is a leader in darts equipment and sponsors some of the biggest names in the game including Luke Littler and Rob Cross. Their latest product creates a new category of connected IoT devices bringing the skill and excitement of the game to homes at the touch of a button.
The Virt Camera is a two-way camera system that allows users to play competitive darts against a global online community. It's front facing camera lets you opponent watch your throw, while the dartboard facing camera allows them to see your dart land in real time, high-definition video.
Target Darts approached Cubik with a prototype of their new product and asked us to conduct a design review that focussed on design for manufacture and supply. The Virt needed to stream two live video feeds to a remote server and an app that would configure and score the game. The biggest challenge was fitting the amount of tech needed into a sleek, compact design whilst maintaining a high-quality video feed.
As part of the design review, we produced a low volume build of the existing prototype to test and analyse. Using the output, we made design recommendations to improve performance and streamline the manufacturability of the product.
Getting the camera tech right was a big piece of the puzzle. Our team carried out extensive research and testing to select the best camera component. We then designed and built a bespoke PCB that enabled the camera to interact with off the shelf components to bring the whole system together.
With a refreshed design that employed design for manufacture principles, we went on to successfully support Target Darts through the regulatory certification process and achieved CE, UKCA and FCC approval.
The result, a market ready product that is now available to purchase: https://bit.ly/40fuW5k
The IZLID is a compact, lightweight infrared laser device used by the military as a command pointer for target marking and communicating with aircraft. It is small enough to fit into the user’s pocket, or attach to their belt for quick access, offering swift guidance to ground personnel over a range of 39km.
Close Air Solutions (CAS) asked Cubik to design a simulator that replicated the look and feel of the IZLID’s aesthetics, ergonomics and user functions, without the infrared beam. The IZLID simulator needed to connect to CAS simulation system via a single USB lead and return data back to the simulation system.
The IZLID simulator is used in classroom based military training to help soldiers gain knowledge and experience of how it would behave in a real-world application. Simulation is a critical part of military training allowing soldiers to experience realistic scenarios in a virtual world, improving their decision making and readiness for combat situations.
The Reskube offers a simple solution providing access to both continuous power and uninterruptible internet connectivity for itself and any connected devices during a power outage. It’s sleek and portable design means that it can be used in a wide range of settings from powering a home office to life saving medical equipment. This intelligent device has the capability to detect and resolve issues before they become a problem.
With our friends at Bang Creations delivering the mechanical design, we were brought on board to design and build the system architecture and support the product through regulatory certification. We worked closely with Bang to ensure the electronic system fit the custom enclosure without compromising on quality and performance.
Designed with critical remote workers in mind the Reskube gives users the confidence to work from any location without fear of disruption. Outside of the home, Reskube maintains continuous operations during outages for small sites such as retail stores, construction sites, doctor's surgeries, and primary schools, ensuring that critical systems and equipment remain operational. Additionally, it offers the added benefit of remote monitoring and management. In global regions where power outages are commonplace the Reskube offers a source of reliability and resilience in an environment with unpredictable connectivity.
Bristol & London based company, Switchee Ltd developed a smart thermostat solution aimed at reducing energy bills in social housing. The intelligent device learns the routine of the household, detects when the house is not occupied and turns the heating on or off accordingly. The device allows valuable data to be gathered remotely reducing the requirement for complex interaction or configuration from the user.
Switchee approached Cubik for help with the development of the software drivers which allow the operating system to communicate with the hardware. This quickly evolved into a larger scheme of work that incorporated the printed circuit board (PCB) design, prototype manufacture and firmware development.
Switchee is the first internet-connect device in social housing. It delivers real-time data that gives housing providers the insights and tools they need to proactively support residents and manage homes.
With a Switchee device installed, energy efficiency can be optimised on a case-by-case basis reducing energy waste, lowering heating bills and cutting carbon emissions.
This month, we were joined by Joe for his week’s work experience. Here’s what Joe got up to during his time with the team:
Day 1
I started the day by sitting in on the Monday Morning Meeting where the team discusses each project and key priorities for the week ahead. It was interesting to hear about the different projects that Cubik work on. Afterwards I did lots of jobs and spoke with several people in the company. For example, I inspected plastics with Steve, found faults in PCB’s with Luke and also wrapped up some of the products in bubble wrap packaging. I also prepared wires and mechanically built products such as overcurrent boxes. At lunch, I socialised with some of the employees and gained an understanding of their role and responsibilities.
Day 2
Today, I gradually worked through and finished the 5 over current boxes with Mariusz giving instructions and help if needed. Throughout the day I was also given several other jobs, such as packaging and making tea, all of which help in some way. In the afternoon, Mariusz helped me develop my soldering skills which was very beneficial.
Day 3
I started the day with Mariusz, polishing and wrapping the 5 over current boxes ready to be shipped, which took a considerable amount of time. After lunch I prepared a bunch of wires and cables by cutting them precisely, and some for the sleeves, which again took sometime. I also put serial code stickers on located areas on PCB’s - which is not as easy as it sounds.
Day 4
Today I was heavily involved in the structuring process of PCB’s and cables, with Steve and James, who work in the production team. I had to delicately place wires into slots and screw them in, in the correct order, without breaking them which was quite a fiddly job. I also helped Mariusz organise scrap materials and tidy the workshop.
Day 5
On my last day, I finished the Wessex Hatches wrapped them and put them in a box with a cable. I then wrapped and prepared them for shipping. Later in the day I observed Luke whilst he tested several PCB’s in different ways. I then precision cut 80 wires to 280mm long using a technique Mariusz had taught me. Finally, I helped wrap some more mechanical and metal products.
This month, we were joined by Harry for his week’s work experience. Here’s what Harry got up to during his time with the team:
Day one
Today I worked in Production and the Metryx production room, learning how things are done. First, I was shown how to check that everything ordered had arrived and that the quantity of it is right. Then I did some mechanical work on WES001P. Finally, I cut wires to the correct length and then stripped and crimped them with Mariusz in the Metryx production room.
Day two
Today, I was back with production. I started by checking a few deliveries against the delivery notes to ensure they were the correct components ordered. I then moved from the production room into the Metryx room and helped Josh QC/QA check 4 fan units by checking the wiring for continuity and checking all the clipped in parts were clipped in. We also checked that the screw torque lines were correct and lined up. After all these passed, we wrapped 2 fan units using bubble wrap and Sellotape and boxed the other 2 to ensure safe packaging. I then returned to the production room and wired all the WES001P that I had put together the day before. Finally, I helped Luke package the LIM chargers by bagging all the accessories and boxing them.
Day three
Today I have been working in the design team with Russell. I have been learning how to use Solid Works 2018 and can now design simple things like a ninja star. I have been listening and working along to tutorials on Solid Professor. Before I came here, I only knew the very basic concepts on SolidWorks but now I can design and evaluate designs. After I learned how to use SolidWorks, I was told I would have a chance to design something which I could 3D print - a ninja star. After I had designed the ninja star, and had the design approved by Russell, he took me to the 3D printing room where we started to print it. As it was getting late in the day, and the print would take 2 hours and 40 minutes, I wasn’t able to collect it until the following day. There were a few problems with the 3D printer initially. The pad which the filament is laid onto didn’t heat up properly meaning the filament wouldn’t stick. We turned the machine fully off and back on again which solved the problem. The filament didn’t seem to stick to the bed the first couple of tries but eventually it did and then ran smoothly from there.
Day four
Today I inspected my 3D printed ninja star which had printed without fault. I then worked in production for the day where I mainly checked deliveries against their dispatch notes to ensure that they were the correct component and have arrived in the correct quantity. I then did some mechanical work putting Pitchmark fuse boxes together. After that, I booked in all the components which had arrived by checking they’re quantity and order numbers. Once completed, I kitted for the job by putting the specific components in all the boxes ready for hand assembly.
Day five
On my last day, I worked with Marijan, and we produced a schematic and a circuit. This was a circuit that takes solar energy and transfers it into spinning an uplift (which is a piece of art). The circuit which was already made looked messy and didn’t make the most of the solar energy meaning the uplift wasn’t spinning to the speed it should be. It also didn’t spin as smoothly as expected. We redesigned the circuit on Altium designer so that it worked smoothly and quickly. We printed off the finished designs ready for approval so they can be sent off and the boards printed to enable volume production to start.
On 27 September, we attended the Business Leader Awards held at Ashton Gate as nominees for Business in the Community, against some tough competition including Bristol Sport and Andrews Property Group.
The evening started with a champagne reception followed by a formal three course dinner. Once service had finished, comedian Russell Kane took to the stage to entertain the crowd. During his act, he took a particular shine to our very own Camilla.
Unfortunately, we didn’t win our category, but it was an honour to have been nominated amongst some of the best businesses in the region.
We had a fantastic evening from start to end. Not only did we love getting glammed up but also the opportunity to network with some fantastic companies and individuals.
On Sunday 22 April, Cleve RFC competed in the ‘Gloucester County Under 16s Plate’ final against Hucclecote RFC. As one of the main sponsors of the age group we are proud to report that following an exciting match, the Cleve boys came out on top in a 43-22 win.
With creative touches of brilliance mixing with well-constructed set plays coming from both teams, it was clear that the boys were delivering a high level of rugby and both teams deserved to be in the final.
In the first half, both teams suffered injuries with the 3G surface and intense competition taking its toll. However, there was depth of quality throughout the rival squad and the players didn’t let injuries stop what was a great contest.
After a very nervy first half ending 12-17 to Hucclecote, the supporters on the side line didn’t stop believing in the Cleve boys and their encouragement inspired the lads for a outstanding second half performance.
With an early try to Cleve the momentum had shifted and there was an increasing belief, after the loss in the same final last year, that this year the boys would walk away as champions.
The final play resulted in Cleve scoring another well worked team try and as the final whistle came, the boys ran to a huddle to begin celebrating what was a great win against a tough and capable Hucclecote team.
This final game of junior rugby was the icing on the cake for what has been a fantastic journey; from under 7s rugby through to development and senior rugby next year. As the club moto says: ‘we sow to reap’.
A massive thank you to the coaches who dedicated their time over the past ten years; a job well done.
We’re getting in the festive spirit at Cubik HQ, and to spread the festive cheer, we have designed a LED game that doubles up as both a Christmas card and tree decoration.
We followed the same 5-phase gate system for this seasonal project that we do for most of our customer projects:
Specification
Following the success of our previous Christmas cards, this year’s innovation was to design a snowflake PCB with an increased number of LED’s, increased number of gaming levels and infinite lives.
Design
The snowflake PCB schematics were designed in Altium Designer and reviewed internally using our typical internal review process.
Production Prototype
The blank PCB’s and electronic components were procured, which allowed for PCB assembly to begin.
Software
Based on the previous firmware we developed the sequencing of the LED’s, increasing the number of levels and game completion animations.
Test
Internal testing involved Cubik team members attempting to complete the game and assessing whether the product worked as it should.
Matt Jackson, one of Cubik’s Senior Software Engineers explains how he approached the Software Phase of this project:
“As this year’s Christmas card is an evolution of the last, we started with the previous firmware as a starting point. The snowflake design has a greater number of game LEDs, and they are laid out differently on the boar, so the first challenge was to change the sequence of LEDs to fit the new layout. Next, we added more levels and gave the player infinite live. It is Christmas, after all!
Each level has a unique speed or pattern which needs tweaking to keep it interesting from one level to the next. At this point everyone in the office had a play so we could evaluate the difficulty. After a couple of iterations to refine the patterns and difficulty, all that was left was to make some pretty animations for winning the game and sitting on your Christmas tree.”
After months of hard work and Standard Operating Procedures (SOPs),we have passed our ISO audit which means we are ISO 9001:2015 certified. This is the international standard that specifies requirements for a quality management system (QMS). ISO 9001 is the world’s most widely recognised quality management system accreditation and monitors quality across our business, benchmarking consistent performance and service with the goal to enhance customer satisfaction.
Sam Beard, Operations Manager and ISO lead said:
“As a company we are delighted that all our hard work has paid off. The standard itself shows a commitment to continuously improving business processes. This not only benefits Cubik, but also enforces major improvements to our customer interaction and working; ensuring they have a pain free journey with Cubik and receive the best achievable output from a project.”
ISO 9001 is based on the 'plan do check act' methodology and provides a process-oriented approach to documenting and reviewing the structure, responsibilities, and procedures required to achieve effective quality management within an organisation. Specific sections of the standard contain information on topics such as:
On Sunday 14 October, one of Cubik’s graduate design engineers took part in Rough Runner, a challenging 10K obstacle course. As if that wasn’t tough enough it was made even tougher by the difficult weather conditions.
In 2017, Shannon sadly lost her brother aged just 28 years old and wanted to raise money in for mental health charity, Mind, in his memory.
Shannon completed the course in 1 hr and 27 mins and raised a whopping £640.00. Below are some photos of Shannon in action and we’re proud to see that she’s still got a smile on her face - even at the end. Or maybe she was just pleased it was over!
From everyone at Cubik, well done Shannon – we are so proud of you!
If you’d like to sponsor Shannon and raise money for Mind, you can donate via her fundraising page.
On 28 September, Cubik joined in with the Macmillan Coffee Morning. To fuel the team for a busy day ahead, Paul brought in some breakfast treats for everyone.
As the rest of our Cubites arrived, the table quickly filled with lots of lovely treats, including some international recipes.
We were delighted to have raised £214.00 for such a fantastic cause.
Over the past year, we’ve been joined by Jean-Paul Astal-Stain as an Electronics Design Engineer Intern for the 2017-18 academic year. During his time with Cubik, Jean-Paul made a big impact on the company with his bubbly nature and enlightening with his unique perspective on things, both inside and outside of work. Since completing his internship, returned to Cubik on a part time basis as an engineer during his final year at the University of Bath.
My time at Cubik
From the very start of my internship, it was clear to see that university offers just a snapshot of the many different areas of electronic engineering. During my time at Cubik, I’ve been exposed to a vast number of technologies and have learnt how an idea can go from a set of drawings on paper to a fully manufacturable product – an invaluable experience. Cubik is an amazing place to work with lovely people, interesting work, and a solid work ethos.
How I feel about my Internship
Comparing my internship with other students doing the same course, it was clear to see that Cubik was very different to the traditional internships offered by large corporations. Instead of being sat at a desk going through Excel spreadsheets for 8 hours of my day, I’m engaged in a variety of different projects that challenge me intellectually without being too stressful. I can honestly say that during my time here, I’ve been treated as a member of the team and haven’t been given easy work just because I’m a student.
I was very happy with how Cubik showed a genuine interest in my development, specifically asking what areas I wanted to improve on and giving me the possibility of doing so. This was often brought up in our one-to-one meetings with management where my progress was monitored and the question of “what can Cubik do for you” was asked repeatedly.
What I have learned
Problem solving was certainly one area in which I feel I’ve progressed tenfold. Being given a new project that you’ve never seen before, learning how it should work and then being tasked with figuring it out why it’s not. Project management is another area in which I feel I’ve developed my skillset including keeping to deadlines, sticking to a product specification, and communicating with the customer. All skills that I’ll benefit from when I go back to university and in any job I have afterwards. As well as this, my technical skills have improved massively which I attribute to being surrounded by lots of intelligent people who are always willing to give a helping hand.
Going forward
Cubik have deepened my interest into the subject and made me a lot more confident as a design engineer. This sort of reassurance that the industry is right for you is invaluable and has allowed me to pick a specific area of electronics to target for my career. I’m extremely grateful for being given the opportunity to work for a company such as Cubik and can only sing it’s praises to anyone who is thinking of applying for an internship here.
.jpg)
.svg){kind=small}
